JIS G3456 Carbon Steel Pipes
G3456 Pipes for High Temperature Service Manufacturer.
Distributor of G 3456 Tubes for machine structural purposes in India.
JIS G3456 STPT 410 pipe
JIS G3456 STPT370 Pipe
G3456 STPT480 Pipes
Tubos India is one of the large manufacturers for high quality STPT JIS G3456 Standard. Applications of JIS G3456 carbon steel high-pressure pipes are widely used for high pressure service, pressure service and high temperature software. They are typically used your past piping higher working pressure and an issue temperature of below 350 degree celsius. The high pressure steel pipes is also utilized in machinery, boiler, gas tank, electric power, chemical engineering, offshore and petroleum engineering etc.
JIS G3456 have outer dimension from 19.05 mm to 114.3 mm & wall thickness ranges from 2.0 mm to 14 mm. We supply different grades of high pressure steel pipes such as JIS G3456 STPT 370, JIS G3456 STPT 410 and JIS G3456 STPT 480.
JIS G3456 Pipe Chemical Composition
| Grade | C | Si | Mn | P | S |
| JIS G3456 STPT370 | ≤ 0.25 | 0.10-0.35 | 0.30-0.90 | ≤ 0.035 | ≤ 0.035 |
| JIS G3456 STPT410 | ≤ 0.30 | 0.10-0.35 | 0.30-1.00 | ≤ 0.035 | ≤ 0.035 |
| JIS G3456 STPT480 | ≤ 0.33 | 0.10-0.35 | 0.30-1.00 | ≤ 0.035 | ≤ 0.035 |
JIS G3456 Pipe Mechanical Properties
| Grade | Tensile Property (N/mm2) | Yield Point or Yield Strength (N/mm2) | Elongation (%) | |||
| NO. 11 Sample; NO. 12 Sample | NO. 5 Sample | NO. 4 Sample | ||||
| Longitudinal | Transverse | Longitudinal | Transverse | |||
| JIS G3456 STPT370 | ≥ 370 | ≥ 215 | ≥ 30 | ≥ 25 | ≥ 28 | ≥ 23 |
| JIS G3456 STPT410 | ≥ 410 | ≥ 245 | ≥ 25 | ≥ 20 | ≥ 24 | ≥ 19 |
| JIS G3456 STPT480 | ≥ 480 | ≥ 275 | ≥ 25 | ≥ 20 | ≥ 22 | ≥ 17 |
JIS G3456 Outer Diameter and Wall Thickness
| Type | Allowable Deviation of Outer Diameter | Allowable Deviation of Wall Thickness | |||
| Hot-Working Seamless Steel Pipe | ＜50 mm | ± 0.5 mm | ＜ 4 mm ≥ 4mm | ± 0.5 mm ±12.5% | ≤ 20% of thickness |
| ≥ 50mm~＜160mm | ± 1% | ||||
| ≥ 160mm~≤ 200 mm | ± 1.6 mm | ||||
| ≥ 200 mm | ± 0.8% | ||||
| For ≥350 mm ones, we can measure according to the perimeters. Allowable deviation is ± 0.5%. | |||||
| Cold-Working Steel Seamless Pipe and Electric-Resistance Welded(ERW) Steel Pipe | ≤ 40 mm | ± 0.03 mm | ＜ 2 mm ≥ 2 mm | ± 0.2 mm ± 10% | - |