EN 10025 seamless pipe suppliers in india

Tubos India is one of the large manufacturers for high quality BS EN 10025 Pipe. EN 10025-2 Hot rolled products of structural steels - 2: Technical delivery conditions for non-alloy structural steels - 2 of this document, in addition to Part 1 specifies the delivery condition for flat and long products and semi-finished products. Hot rolled products of structural steel delivery condition for normalized/ normalized rolled weldable fine grain structural steel in addition to part 1, specifies requirement for flat and long product of hot rolled weldable fine grain structural steel in the normalized/ normalized rolled delivery condition in the grades and qualities. EN 10025-4 Hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the grades and qualities in thickness L 120 mm for flat products and in thickness L 150 mm for long products. In addition to EN 10025-1 the steel specified below are specially intended for use in heavily loaded parts of welded structures such as flood gates, bridges, water supply tanks, storage tanks etc for service at ambient and low temperatures.

The steels specified are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness ≤ 150 mm for grades S500, S460, S550, S620 and S690, a maximum nominal thickness of ≤ 100 mm for grade S890 and a maximum nominal thickness of ≤ 50 mm for grade S960 in steels which after quenching and tempering having a specified minimum yield strength of 460 MPa1 to 960 MPa1.

Available Stock EN 10025 Steel Grades :