A335 P5 Alloy Steel pipes Manufacturers in India
Exporters of 5b alloy steel seamless pipe, Supplier of ASTM A335 P5 Pipe.
Buy Alloy Steel Gr. P5 round Pipes in india, Check Alloy Steel Gr. P5 specifications, Stockist of Alloy Steel A335 p5/5b/5c Pipe.
Alloy Steel P5 Pipe
ASTM A335 P5 Welded Tubes
ASTM A335 P5 Seamless Pipe
Tubos India is one of the large manufacturers for high quality Alloy Steel P5 Pipes. At the same time by control of nitrogen and carbon and careful selection of molybdenum, chromium and tungsten levels, many of the nickel based alloy corrosion properties such as of AS P5 Seamless Pipes have been attained. The operating conditions of flue gas desulfurization systems in ASTM A335 P5 Pipe Suppliers offer a challenging environment for corrosion resistant materials. The hot-working temperature range for AS P5 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C). ERW Alloy Steel P5 Pipes should be water quenched after hot working where heat treatment is recommended after hot working to ensure maximum corrosion resistance.
Round Alloy Steel P5 Pipes also performs well in seawater specially under crevice conditions where other frequently used alloys such as stainless steel. Sigma phase precipitates in Square Alloy Steel P5 Pipes can form after only a few dozen minutes between 1110 Degree F(600 Degree C) and 1830 Degree F(1000 Degree C). The alpha prime precipitate phase in Alloy Steel P5 Rectangular Pipes also presents risk of embrittlement between 660 Degree F(350 Degree C) and 1020 Degree F (550 Degree C). If annealing is carried out in an oxidising atmosphere the resulting scaling in Electropolished Alloy Steel P5 Pipes must then be removed for eexample by pickling.
Table of contents
- ASTM A335 P5 Alloy Steel Specifications
- Alloy Steel ASTM A335 P5b Pipe Chemical Compositions
- Alloy Steel ASTM A335 P5c Mechanical Properties
- Alloy Steel ASTM A335 P5 Pipe Heat Treatment Requirements
- ASTM A335 P5 Alloy Steel Pipe Tensile Requirements
- ASTM A335 Alloy Steel p5 Pipe Wall thickness
- ASTM A335 P5 Alloy Steel Pipe Price List
- ASTM A335 Alloy Steel P5 Pipe Size Chart
- Types Of Alloy Steel ASTM A335 P5 Pipes
|
ALLOY STEEL ASTM A335 P5 PIPES SPECIFICATION | ||
| Alloy Steel ASTM A335 P5 Pipe Size | : | 1/8NB TO 24NB IN |
| Alloy Steel ASTM A335 P5 Pipe Standards | : | ASTM A 335, ASME SA 335, ANSI B36.10 |
| Alloy Steel ASTM A335 P5 Pipe Type | : | Seamless |
| Alloy ASTM A335 P5 Pipe Specialized in | : | Large Diameter Size |
| ASTM A335 Alloy P5 Pipe Wall Thickness | : | Schedule 20 - Schedule XXS (heavier on request) up to 250 thk |
| Alloy ASTM A335 P5 Pipe Form | : | Round, Square, Rectangular, Hydraulic Etc. |
| ASTM A335 Alloy P5 Pipe Length | : | Single Random, Double Random & Cut Length. |
| Alloy Steel ASTM A335 P5 Tubing End | : | Plain End, Beveled End, Treaded |
| Alloy ASTM A335 P5 Pipes | P5 Alloy ASTM A335 |
| AISI P5 ERW Pipe | ASTM A335 P5 Pipe |
| ASTM A335 grade P5 pipe | ASTM A335 P5 Alloy Seamless |
| High Quality ASTM A335 Grade P5 Alloy Steel | ASTM A335 P5 Dealer |
| ASTM A335 grade P5 Alloy Steel Hydraulic | Alloy Steel ASTM A335 Gr P5 LSAW |
| ASTM A335 P5 Alloy | ASME SA / ASTM A335 P5 Pipes |
| ASTM A335 Alloy Steel P5 Seamless | IBR Alloy Steel P5 Pipe |
| Alloy ASTM A335 P5 Seamless Square | ASTM A335 Grade P5 Hydraulic |
| High Pressure ASTM A335 P5 Boiler | ASTM A335 P5 Alloy Steel Rectangular |
ASTM A335 Alloy Steel p5c Pipe Chemical Compositions
| C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
| 0.015 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50 max | 4.00-6.00 | 0.45-0.65 |
ASTM A335 P5 Alloy Steel Pipe Mechanical Properties
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 415 min | 205 min | 30 min |
ASTM A335 Alloy Steel P5 Pipe Heat Treatment Requirements
Alloy ASTM A335 P5, P9, P11, and P22 | |||
Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing |
P5 (b,c) | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1250 [675] | |
Subcritical Anneal (P5c only) | ***** | 1325 - 1375 [715 - 745] | |
P9 | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1250 [675] | |
P11 | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1200 [650] | |
P22 | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1250 [675] | |
P91 | Normalize and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
Quench and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
ASTM A335 P5 Alloy Steel Pipes Tensile Requirements
Seamless | ||||||
P-5 | P-9 | P-11 | P-22 | P-91 | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. | |
Tensile Strength, min., psi | ||||||
ksi | 60 | 60 | 60 | 60 | 85 | |
MPa | 415 | 415 | 415 | 415 | 585 | |
Yield Strength, min., psi | ||||||
ksi | 30 | 30 | 30 | 30 | 60 | |
MPa | 205 | 205 | 205 | 205 | 415 | |
ASTM A335 Alloy Steel P5 Pipes Wall thickness
| NPS [DN] Designator | Tolerance, % from Specified | |
| Over | Under | |
| 1/8 to 2 1/2 [6 to 65] incl., all t/D ratios | 20.0% | 12.5% |
| Above 2 1/2 [65], t/D < or = 5% | 22.5% | 12.5% |
| Above 2 1/2 [65], t/D > 5% | 15.0% | 12.5% |
| (t = Specified Wall Thickness; D = Specified Outside Diameter) | ||
ASTM A335 P5 Alloy Steel Pipe Price List
- ASTM A335 P5 Alloy Steel seamless pipes
US $2500-4100 / Ton (FOB Price) - seamless pipe astm A335 Alloy Steel P5
US $20-1200 / Ton (FOB Price) - ASTM A335 Alloy Steel P5 seamless pipe
US $500-2000 / Ton (FOB Price) - ASTM A335 P5 Alloy Steel High Pressure pipe
US $850-2200 / Metric Ton (FOB Price) - sa335 P5 alloy seamless pipe
US $1.5-9 / Kilogram (FOB Price) - ASTM A335 P5 Alloy seamless pipe manufacturer
US $850-2200 / Metric Ton (FOB Price) - ASTM A335 Gr.P5 Alloy Steel Chrome moly Pipe
US $500-1000 / Ton (FOB Price)
ASTM A335 Alloy Steel P5 Pipe Size chart
Alloy Steel ASTM A335 P5 Pipe Dimensions, NB Size Schedule
| O.D. x Thickness(mm) | O.D x Thickness(mm) | O.D x Thickness(mm) |
|---|---|---|
| 38.1 x 3.2 | 57.0 x 4.9 | 76.2 x 4.0 |
| 38.1 x 4.0 | 57.0 x 6.3 | 76.2 x 5.0 |
| 38.1 x 6.3 | 57.0 x 7.9 | 76.2 x 6.3 |
| 42.4 x 3.2 | 60.3 x 3.2 | 82.5 x 4.5 |
| 42.4 x 4.0 | 60.3 x 3.6 | 88.9 x 3.2 |
| 44.5 x 3.2 | 60.3 x 5.0 | 88.9 x 3.6 |
| 44.5 x 6.3 | 63.5 x 3.2 | 88.9 x 4.0 |
| 48.3 x 3.2 | 63.5 x 3.6 | 101.6 x 3.6 |
| 48.3 x 3.6 | 63.5 x 4.0 | 101.6 x 4.5 |
| 50.8 x 4.5 | 63.5 x 6.3 | 101.6 x 6.3 |
| 51.0 x 3.2 | 63.5 x 7.9 | 114.3 x 3.6 |
| 51.0 x 3.6 | 70.0 x 3.2 | 114.3 x 5.0 |
| 51.0 x 6.3 | 70.0 x 3.6 | 139.7 x 4.0 |
| 57.0 x 3.2 | 70.0 x 6.3 | 139.7 x 5.0 |
| 57.0 x 3.6 | 76.2 x 3.6 | 139.7 x 6.3 |
| NB | Size | OD | 40S | 5S | 10S | S10 | S20 | S40 | S60 | XS/80S | S80 | S100 | S120 | S140 | S160 | XXS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
| 1/8” | 10.29 | 1.2 | 1.73 | 2.41 | ||||||||||||
| 1/4” | 13.72 | 1.7 | 2.24 | 3.02 | ||||||||||||
| 3/8” | 17.15 | 1.7 | 2.31 | 3.2 | ||||||||||||
| 15 | 1/2” | 21.34 | 2.8 | 1.7 | 2.1 | 2.77 | 3.73 | 3.73 | 4.78 | 7.47 | ||||||
| 20 | 3/4” | 26.67 | 2.9 | 1.7 | 2.1 | 2.87 | 3.91 | 3.91 | 5.56 | 7.82 | ||||||
| 25 | 1” | 33.4 | 3.4 | 1.7 | 2.8 | 3.38 | 4.55 | 4.55 | 6.35 | 9.09 | ||||||
| 32 | 1 1/4” | 42.16 | 3.6 | 1.7 | 2.8 | 3.56 | 4.85 | 4.85 | 6.35 | 9.7 | ||||||
| 40 | 1 1/2” | 48.26 | 3.7 | 1.7 | 2.8 | 3.68 | 5.08 | 5.08 | 7.14 | 10.2 | ||||||
| 50 | 2” | 60.33 | 3.9 | 1.7 | 2.8 | 3.91 | 5.54 | 5.54 | 9.74 | 11.1 | ||||||
| 65 | 2 1/2” | 73.03 | 5.2 | 2.1 | 3.1 | 5.16 | 7.01 | 7.01 | 9.53 | 14 | ||||||
| 80 | 3” | 88.9 | 5.5 | 2.1 | 3.1 | 5.49 | 7.62 | 7.62 | 11.1 | 15.2 | ||||||
| 90 | 3 1/2” | 101.6 | 5.7 | 2.1 | 3.1 | 5.74 | 8.08 | 8.08 | ||||||||
| 100 | 4” | 114.3 | 6 | 2.1 | 3.1 | 6.02 | 8.56 | 8.56 | 11.1 | 13.5 | 17.1 | |||||
| 125 | 5” | 141.3 | 6.6 | 2.8 | 3.4 | 6.55 | 9.53 | 9.53 | 12.7 | 15.9 | 19.1 | |||||
| 150 | 6” | 168.3 | 7.1 | 2.8 | 3.4 | 7.11 | 10.97 | 11 | 14.3 | 18.3 | 22 | |||||
| 200 | 8” | 219.1 | 8.2 | 2.8 | 3.8 | 6.4 | 8.18 | 10.3 | 12.7 | 12.7 | 15.1 | 19.3 | 20.6 | 23 | 22.2 | |
| 250 | 10” | 273.1 | 9.3 | 3.4 | 4.2 | 6.4 | 9.27 | 12.7 | 12.7 | 15.1 | 19.3 | 21.4 | 25.4 | 28.6 | 25.4 | |
| 300 | 12” | 323.9 | 9.5 | 4 | 4.6 | 6.4 | 10.3 | 14.3 | 12.7 | 17.5 | 21.4 | 25.4 | 28.6 | 33.3 | 25.4 | |
| 350 | 14” | 355.6 | 9.5 | 4 | 4.8 | 6.4 | 7.9 | 11.1 | 15.1 | 12.7 | 19.1 | 23.8 | 27.8 | 31.8 | 35.7 | |
| 400 | 16” | 406.4 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 12.7 | 16.7 | 12.7 | 21.4 | 26.2 | 31 | 36.5 | 40.5 | |
| 450 | 18” | 457.2 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 14.3 | 19.1 | 12.7 | 23.8 | 29.4 | 34.9 | 39.7 | 45.2 | |
| 500 | 20” | 508 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 15.1 | 20.6 | 12.7 | 26.2 | 32.5 | 38.1 | 44.5 | 50 | |
| 550 | 22” | 558.8 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 22.2 | 12.7 | 28.6 | 34.9 | 41.3 | 47.6 | 54 | ||
| 600 | 24” | 609.6 | 9.5 | 5.5 | 6.4 | 6.4 | 9.5 | 17.5 | 24.6 | 12.7 | 31 | 38.9 | 46 | 52.4 | 59.5 | |
| 650 | 26” | 660.4 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
| 700 | 28” | 711.2 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
| 750 | 30” | 762 | 9.5 | 6.4 | 7.9 | 7.9 | 13 | 12.7 | ||||||||
| 800 | 32” | 812.8 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
| 850 | 34” | 863.6 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
| 900 | 36” | 914.4 | 9.5 | 7.9 | 13 | 19.1 | 12.7 |
Types Of Alloy Steel ASTM A335 P5 Pipes & Tubes
• Alloy Steel P5 Welded Pipe
• ASTM A335 Alloy P5 Erw
• ASTM A335 Alloy P5 Efw Pipe
• ASTM A335 Alloy Steel P5 Fabricated
• ASTM A335 Alloy P5 Square Pipe
• ASTM A335 Alloy Steel P5 Rectangular
• ASTM A335 Alloy P5 Round Pipe
• ASTM A335 Alloy P5 High Pressure