A252 Grade pipe Suppliers India

ASME SA252 Steel Seamless Pipes, A252 Grade 3 steel pipe manufacturer.

Grade 2 pipes wide sizes & Cut to size ASTM A252 grade 3 pipes.

ASTM A252 Piles Pipes

ASTM A252 Piles Pipes

Welding ASTM A252 Grade 3 pipe

Welding ASTM A252 Grade 3 pipe

ASME SA252 Pipe

ASME SA252 Pipe

Tubos India is one of the large manufacturers for high quality ASTM A252 Steel Pipes. ASTM A252 steel piling pipe is a structural pipe ideally suited for application in retaining walls, buildings and other structures needing dependably, solid, quality made steel piling pipe as its structure. ASME SA252 Specifications describes nominal (i.e. average) wall steel piles pipe of cylindrical shape and applies to pipe piles in which the steel cylinder acts as a permanent load carrying member or else as a shell to form case-in-place concrete piles.

Imperfect Surface exceeds 25% of the nominal wall in depth are considered defects. Defects not exceeds 22.5% of the nominal wall in depth shall be repaired by welding. Before welding, the defect shall be completely removed.

ASME SA252 Mechanical Properties

ASTM A252 Grade 1ASTM A252 Grade 2ASTM A252 Grade 3
Tensile Strength, min, psi50,00060,00066,000
Yield Strength30,00035,00045,000

ASME SA252 Chemical Requirements

Seamless and ERW WeldedMax% 0.050

ASTM A252 Tensile Requirements

 ASTM A252 Grade 1ASTM A252 Grade 2ASTM A252 Grade 3
Tensile Strength, min, psi(MPa)50000(345)60000(415)66000(455)
Yield point or Yield Strength, min, psi(MPa)30000(205)35000(240)45000(310)
Elongation in 8 in (203.2 mm),min,%1814-
Elongation in 2 in (50.8 mm),min,%302520

  • Testing Requirements for welded and seamless ASTM A252 steel piling pipe
    • Hydrostatic Testing:Not specified.
    • Mechanical Tests:
      • Tensile Test: Either transverse or longitudinal at option of manufacturer.
    • Number of Tests:One tensile test per 200 lengths.

  • Permissible Variations for ASTM A252 steel piling pipe
    • Wall thickness: Not more than 12.5% under the nominal wall thickness specified.
    • Weights per foot: The weight of any individual length of pipes shall not vary more than 15% over or under 5% the weight specified. Each individual length shall be weighed separately.
    • Outside diameter: Shall not vary more than plus or minus 1% from the diameter as specified.

  • Lengths of ASTM A252 steel piling pipes

    Steel Tubular Products ASTM A252 steel pipes piling may be ordered in single or double random lengths or in uniform lengths.

    • Single random – 16’ – 25’ inclusive
    • Double random – Over 25’ with a minimum average of 35’
    • Uniform – Plus or minus 1” on length specified

  • Marking Requirements

    Die-stamped, Rolled or paint-stenciled (manufacturer’s option).

    • Manufacturer’s name, brand, or trademark
    • Heat number
    • Method of pipe manufacture
    • Size, weight, length
    • Wall thickness
    • ASTM A252 and steel grade

© 2018 Tubos India. All rights reserved.
Website Designed & SEO by Mesotek