SA213 T5 Material Tubes Suppliers In India

Stockholder of ASTM A213 Grade T5 Tubing. .

Cut to size SA213 T5B High Pressure Tube Exporter in India.

Alloy steel UNS K4154 Tubes

Alloy steel UNS K4154 Tubes

T5 Steel Tubes

T5 Steel Tubes

ASTM A213 T5 Seamless Tubes

ASTM A213 T5 Seamless Tubes

Tubos India is one of the large manufacturers for high quality Alloy Steel ASTM A213 T5 Tubes. Alloy Steel T5 Tubes is used interchangeably, based on application where products that use acidified solutions can introduce a strong risk for corrosion. Major hot working in ASME SA213 AS T5 Seamless Tubes should be done between 2300 Degree F - 1850 Degree F, while light working can be continued as low as 1600 Degree F. SA213 T5 Alloy Steel Tube is otherwise called ASTM A213 T5 chrome moly tube as a result of the concoction cosmetics of Chromium (Cr) and Molybdenum (Mo). No hot working in Alloy Steel Welded T5 Tubes should be attempted between 1600 Degree F - 1200 Degree F due to lower ductility in that range. Above this temperature in Alloy Steel EFW T5 Tubes, grain growth may be objectionable, although very huge heating at 1900 Degree F will cause complete softening without undue grain growth. Due to this reason, age – hardened alloys such as T5 Alloy Steel ERW Tubes are machined using an aggressive but slow cut with a hard tool, minimizing the number of passes required.

Cold working of Alloy Steel T5 Rectangular Tubes at levels between 30 % and 65 % result of high room temperature yield strengths. The majority of the machining in ASTM A213 Alloy Steel T5 Round Tubes can be performed with the work piece in a solutionized form with only final steps being performed after age hardening. The UNS number is covered by ASME, ASTM, ISO, DIN and other international standards, which makes Alloy Steel T5 Square Tubes available in many common product forms.

Alloy Steel ASTM A213 T5 Tubes Chemical Compositions

T5T5bT5c
C, %0.15 max0.15 max0.12 max
Mn, %0.30-0.600.30-0.600.30-0.60
P, %0.025 max0.025 max0.025 max
S, %0.025 max0.025 max0.025 max
Si, %0.50 max1.00-2.000.50 max
Cr, %4.00-6.004.00-6.004.00-6.00
Mo, %0.45-0.650.45-0.650.45-0.65
Ti,%--4*C-0.7

Alloy Steel ASTM A213 T5 Tubes Mechanical Properties

T5T5bT5c
Tensile Strength , MPa415 min415 min415 min
Yield Strength, MPa205 min205 min205 min
Elongation, %30 min30 min30 min
Hardness, HB163 max179 max163 max

ASTM A213 T5 Alloy Steel Tubes Outside Diameter & Tolerances

Hot rolledOutside Diameter, mmTolerance, mm
OD≤101.6+0.4/-0.8
101.6<OD≤190.5+0.4/-1.2
190.5<OD≤228.6+0.4/-1.6
Cold DrawnOutside Diameter, mmTolerance, mm
OD<25.4±0.10
25.4≤OD≤38.1±0.15
38.1<OD<50.8±0.20
50.8≤OD<63.5±0.25
63.5≤OD<76.2±0.30
76.2≤OD≤101.6±0.38
101.6<OD≤190.5+0.38/-0.64
190.5<OD≤228.6+0.38/-1.14

Alloy Steel ASME SA213 T5 Tubes Wall thickness & Tolerance

Hot rolledOutside Diameter, mmTolerance, %
OD≤101.6, WT≤2.4+40/-0
OD≤101.6, 2.4<WT≤3.8+35/-0
OD≤101.6, 3.8<WT≤4.6+33/-0
OD≤101.6, WT>4.6+28/-0
OD>101.6, 2.4<WT≤3.8+35/-0
OD>101.6, 3.8<WT≤4.6+33/-0
OD>101.6, WT>4.6+28/-0
Cold DrawnOutside Diameter, mmTolerance, %
OD≤38.1+20/-0
OD>38.1+22/-0

Length:5800mm; 6000mm; 6096mm; 7315mm; 11800mm; 12000mm; and so on.
Max length:16000mm, also U bending can be offered.

Alloy Steel ASTM A213 T5b Tubes Price List

  • T5/T5b/T5c seamless alloy steel Tubes
    US $1-5 / Kilogram (FOB Price)
  • seamless Tubes astm a213 t1
    US $700-3300 / Ton (FOB Price)
  • alloy steel seamless Tubes T5/T5b/T5c
    US $700-3000 / Ton(FOB Price)
  • ASTM A213 T5/T5b/T5c alloy steel High Pressure tubes
    US $530.0-600.0 / Tons (FOB Price)
  • sa213 T5/T5b/T5c seamless Tubes
    US $430-600 / Ton (FOB Price)
  • T5/T5b/T5c seamless Tubes manufacturer
    US $1300-3600 / Metric Ton (FOB Price)
  • ASTM A213 Gr. T5/T5b/T5c Chrome Moly Tubes
    US $300-1300 / Ton (FOB Price)

ASTM A213 Alloy Steel T5c Tubes Size Chart

SA213 T5 Tubes Sizes, Lbs per Foot with Price

SizeThickness (")ID (")Lbs per FootPrice(£)
3/16" OD
0.0280.1320.048
7/16" OD
0.0280.3820.12315.12
1/4" OD
0.0280.1940.0678.15
0.0350.180.084.52
0.0490.1520.1057.09
0.0580.1340.11916.94
0.0650.120.12810.73
5/16" OD
0.0280.2570.0859.72
0.0350.2430.1046.71
0.0490.2150.1388.71
0.0580.1970.1588.15
0.0650.1830.1729.90
0.0950.1230.2218.71
3/8" OD
0.0280.3190.1046.59
0.0350.3050.1275.45
0.0490.2770.1715.65
0.0580.2590.1965.45
0.0650.2450.2155.27
0.0830.2090.2599.41
0.0950.1850.2847.51
7/16" OD
0.0350.3680.1515.58
0.0490.340.2047.15
0.0650.3080.2596.59
0.0950.2480.3489.41
0.120.1980.4089.47
1/2" OD
0.0280.4440.1416.01
0.0350.430.1744.82
0.0490.4020.2365.45
0.0580.3840.2744.39
0.0650.370.3026.84
0.0830.3340.376.14
0.0950.310.4119.41
0.120.260.4877.49
9/16" OD
0.0350.4930.19710.35
0.0490.4650.2697.02
0.0650.4330.34611.61
0.120.3230.56811.23
5/8" OD
0.0280.5690.1796.71
0.0350.5550.2215.45
0.0490.5270.3014.95
0.0580.5090.3515.00
0.0650.4950.3898.53
0.0950.4350.5389.90
0.120.3850.6476.71
0.1560.3130.78112.40
3/4" OD
0.0280.6940.2167.22
0.0350.680.2674.57
0.0490.6520.3674.19
0.0580.6340.4294.19
0.0650.620.4765.45
0.0950.560.6659.41
0.120.510.8077.47
0.1560.4380.999.41
0.1880.3741.12813.23
7/8" OD
0.0350.8050.3144.90
0.0490.7770.4325.96
0.0580.7590.5065.71
0.0650.7450.5626.46
0.0830.7090.7026.21
0.0950.6850.7917.83
0.120.6350.9689.47
0.1880.4991.37915.68
1" OD
0.0350.930.3614.95
0.0280.9440.2918.46
0.0490.9020.4984.70
0.0580.8840.5844.64
0.0650.870.6494.70
0.0950.810.0015.53
0.120.761.1289.41
0.1560.6881.40613.18
0.1880.6241.6315.98
1-1/8" OD
0.0351.0550.4079.90
0.0491.0270.5636.71
0.0581.0090.6615.58
0.0650.9950.7366.71
0.0950.9351.0458.46
0.120.8851.28814.80
1-1/4" OD
0.0351.180.4547.02
0.0491.1520.6296.59
0.0581.1340.7388.15
0.0651.120.8236.71
0.0831.0842.1326.71
0.0951.061.1727.34
0.121.011.44811.03
0.1560.9381.82318.25
1-3/8" OD
0.0491.2770.6948.59
0.0351.3050.5017.40
0.0581.2590.8166.71
0.0651.2450.9095.71
0.0951.1851.2997.22
0.121.1351.60912.17
0.1880.9992.38316.18
1-1/2" OD
0.0351.430.5488.46
0.0491.4020.7597.15
0.0581.3840.8938.63
0.0651.370.9967.47
0.0831.3341.2568.28
0.0951.311.4268.46
0.121.261.76911.03
0.1881.1242.63417.42
1-5/8" OD
0.0491.5270.82512.51
0.0581.5090.97113.18
0.0651.4951.0839.41
0.0951.4351.55212.04
0.121.3851.92914.67
0.1561.3132.44717.42
0.1881.2492.88518.18
1-3/4" OD
0.0491.6520.899.85
0.0581.6341.04811.27
0.0651.621.1710.03
0.0951.561.6798.71
0.121.512.08912.35
0.1881.3743.13619.69

Please note: Price is subject to change without any prior notice.
NBSizeOD40S5S10SS10S20S40S60XS/80SS80S100S120S140S160XXS
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
1/8”10.291.21.732.41
1/4”13.721.72.243.02
3/8”17.151.72.313.2
151/2”21.342.81.72.12.773.733.734.787.47
203/4”26.672.91.72.12.873.913.915.567.82
251”33.43.41.72.83.384.554.556.359.09
321 1/4”42.163.61.72.83.564.854.856.359.7
401 1/2”48.263.71.72.83.685.085.087.1410.2
502”60.333.91.72.83.915.545.549.7411.1
652 1/2”73.035.22.13.15.167.017.019.5314
803”88.95.52.13.15.497.627.6211.115.2
903 1/2”101.65.72.13.15.748.088.08
1004”114.362.13.16.028.568.5611.113.517.1
1255”141.36.62.83.46.559.539.5312.715.919.1
1506”168.37.12.83.47.1110.971114.318.322
2008”219.18.22.83.86.48.1810.312.712.715.119.320.62322.2
25010”273.19.33.44.26.49.2712.712.715.119.321.425.428.625.4
30012”323.99.544.66.410.314.312.717.521.425.428.633.325.4
35014”355.69.544.86.47.911.115.112.719.123.827.831.835.7
40016”406.49.54.24.86.47.912.716.712.721.426.23136.540.5
45018”457.29.54.24.86.47.914.319.112.723.829.434.939.745.2
50020”5089.54.85.56.49.515.120.612.726.232.538.144.550
55022”558.89.54.85.56.49.522.212.728.634.941.347.654
60024”609.69.55.56.46.49.517.524.612.73138.94652.459.5
65026”660.49.57.91312.7
70028”711.29.57.91312.7
75030”7629.56.47.97.91312.7
80032”812.89.57.91317.512.7
85034”863.69.57.91317.512.7
90036”914.49.57.91319.112.7

Types of ASTM A213 Alloy Steel T5 Tubes

ASTM A213 Alloy Steel T5 Seamless Tube

ASTM A213 Alloy Steel T5 Seamless Tube

ASTM A213 Alloy Steel T5 Round Tube

ASTM A213 Alloy Steel T5 Round Tube

Alloy Steel T5 Custom Tube

Alloy Steel T5 Custom Tube

 

© 2018 Tubos India. All rights reserved.
Website Designed & SEO by Mesotek