35CrMo Steel Grade Pipe Manufacturer In India
Suppliers of 35CrMo SCM435 Alloy Steel Material.
Wide Stock of Structural 35CrMo Pipes.

Alloy Steel 35CrMo Pipe

35CrMo Steel Equivalent

35CrMo Seamless Pipe
Tubos India is one of the large manufacturers for high quality Alloy Steel 35 CrMo Pipes. Alloy steel 35 CrMo has impact toughness, high static strength and high fatigue limit, harden ability is higher than 40Cr, higher lasting strength and creep strength under high temperature, long-term working temperature up to 500 Degree C. With high performance and application of 35 CrMo such as high temperature creep strength and lasting, better low temperature impact toughness, without overheating tendency, good hardenability, quenching deformation is small, machinability of medium, when cold side plastic fair, 35 CrMo needs preheating before welding, heat treatment after welding and eliminate stress, in commonly used after tempering treatment, can also be used in high frequency surfaces quenching and low temperature tempering in after use.
Alloy Steel 35 CrMo pipe used in the manufacture of bend torsion, withstand shock, the various of high load, and the important parts can also be used in the manufacture of high load transmission shaft, large cross-section gear, motivation and turbo generator rotor, supporting shaft diameter less than 500 mm.
35 CRMO PIPE SPECIFICATION | ||
35 CrMo Thickness | : | 8 mm to 250 mm |
35 CrMo Width | : | 1500 mm to 4050 mm |
35 CrMo Length | : | 3000 mm to 15000 mm |
35 CrMo Delivery condition | : | Annealing / Tempering |
35 CrMo Hardness | : | ≦229 HBW |
35 CrMo Characteristic | : | 35CrMo has high static strength, impact toughness and high fatigue limit. |
35 CrMo Application | : | 35CrMo alloy pipe used to manufacture important parts of various machines that bear the impact, twist and high |
35CrMo Alloy Pipe Chemical Compositions
Chemical composition% | ||||||
C | Mn | P | S | Si | Cr | Mo |
0.32~0.40 | 0.40~0.70 | ≤0.03 | ≤0.03 | 0.17~0.37 | 0.8~1.10 | 0.15~0.25 |
Alloy 35CrMo Pipe Mechanical Properties
Mechanical properties | ||||||
Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation in 2 in. | ||||
≧980 | ≧835 | ≧12 |
Alloy 35CrMo Pipe Equivalent Material
35CrMo material equivalent | |||||||||||||
China | USA | Germany | Japan | France | UK | ISO | |||||||
Standard | Grade | Standard | Grade | Standard | Grade | Standard | Grade | Standard | Grade | Standard | Grade | Standard | Grade |
GB/T 3077 | 35CrMo | ASTM A29/A29M | 4135, 4137 | DIN EN 10083-3 | 34CrMo4 | JISG 4105 | SCM435 | NF EN 10083-3 | 34CrMo4 | BS EN 10083-3 | 34CrMo4 | ISO 683 | 34CrMo4 |